Blender Machine

Product Details:

Manufacturing in cGMP / GMP & Standarad Model

Contact Parts : Stainless Steel 316 or 316 L.
Non Contact Parts: Stainless steel 304 / Claded. or M.S. Powder Coated.

Capacity :

R & D Lab Models : 10 Liter. 20 Liter . 30 Liter.
Pilot scale : 50 Liter. 100 Liter. 200 Liter. 300 Liter.
Commerciel Scale : 500 Liter. 1000 Liter. 1200 Liter. 1500 Liter.
Heavy Commerciel Scale : 2000 Liter. 4000 Liter.

 

TECHNICAL SPECIFICATIONS :

 

 

Product Details:

Available in CGMP / GMP & Standard Model.

• Manually Oprating Push Button system.

• Optional : PLC based HMI / MMI Oprating System.

Capacity :

-R & D Lab Scale models:

• 5 Liters.
• 10 Liters.
• 20 Liters.
• 30 Liters.

-Pilot Scale Models:

• 50 Liters.
• 100 Liters.
• 200 Liters.
• 300 Liters.

Product Details:

Technical Details:

Product Details:

Ribbon blenders are commonly used but they are not so universal that we can ignore their limitations. Ribbon blenders are very effective but only within a range of parameters. The below ribbon mixer characteristics should be considered based on the way a ribbon blender operates.

• Sanitary design improves discharge and makes cleaning easier and more thorough.
• Slide-gate discharge valve with pneumatic actuator .
• 304 stainless steel contact surfaces, packing gland, support structure and chain guard.
• All internal and external welds are radiused, ground smooth, flush and pit free. 200 grit polish inside and out.
• Shaft packing gland housing is split for easy maintenance.
• Provision for gas or liquid purge.
• Sealed pillow block roller bearings.
• Heavy-duty Class-III gear reducer and chain drive.
• Fully welded 304 stainless steel agitator and shaft with flanged ends for easy removal.
• 1-, 2- or 3-piece hinged covers with removable grates. Limit switches* provided for each cover or grate section.

Product Details:

Technical Specifiction:

Product Details:

Enriched with rich industrial experience, we are engaged in manufacturing and supplying wide range of quality tested Blending Machine. Our products are widely used in pharmaceutical industries and are used for blending and mixing the granules. Being V in shape these products functions on the principle of interacting and tumbling. Our entire product range is in compliance with international standards of quality.

Technical Specification:

Product Details:

The Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. 

Salient Features

• Detachable “Double Cone” chamber design to sterilize the ‘Double Cone” chamber In Autoclave.
• Suitable for Inject able dry Powder Mixing.
• Easy for loading and unloading.
• Easy for cleaning.
• All contact parts are made of stainless steel 316L material.
• Two nos. of safety road will be provided at back side for safety operation. ( One LH side & one RH side )
• Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.
• One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.
• Cone will be mirror polished from the inside & outside & structure will be matt polished.
• All moving parts covered with SS304 covers.
• Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
• Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.
• As per customer requirement machine will be provided with left side drive or with right side drive.
• The conical shape at both ends enables uniform mixing and easy discharge.
• Maximum care has been taken to ensure safe operation of the unit.
• Worm reduction gear use for speed reduction.
• Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
• Inside & outside of the cone will be polished to the mirror finished.

Product Details:

Leveraging on our technically advanced manufacturing techniques, we have been able to come up with advanced Lab Blender. These products are engineered in compliance with the international industry standards making use of premium grade metals and components. Furthermore, for ensuring timely delivery of ordered products, we have developed wide distribution channel across the globe.

Features:

• Outstanding functioning
• Rugged design
• Reliable operations

Product Details:

We are engaged in offering engineered range of Tablet Coating Machines which is manufactured from extreme grade of raw material. These Coating Machines are designed for various type of film coatings in several ready products. We do complete quality inspection of these Coating Machines before delivering at the client’s end. 

Product Details:

Advance Engineering Works... manufactures wide range of machine we manufacture Vibro Deburring Machines. These machines have many function some of these are Deburring, Descaling, Edge Radiusing, Grinding, Finishing, Polishing, Surface Improvement, etc. We also manufactures as per customer requirement and special purpose machine in manual- semi automatic and fully automatic.you can deburr and polish any type of metal. The various applications are metal or non-metal parts surface processing, such as deburring, grinding, descaling, edge radiusing, finishing, polishing, surface improvement etc.

Specifications:

• Material: cast Iron, Steel
• Colour: Green, Red
• Type: Polishing Machines
• Applications: Deburring, Descaling, Edge Radiusing

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other